While exploration inRevenge of the Savage Planetis undoubtedly fun, it’s natural to crave more the deeper you venture. Each planet in the game is unique, offering a wide range of atmospheres, ecosystems, and creatures that fuel your sense of discovery.

However, to fully explore these alien worlds, you’ll need upgrades—and to craft those, you’ll have to gather resources. Among these, Printer Slurries are the hardest to find. Unlike other resources, they don’t drop from creatures and are hidden in specific areas. The savannah-like planet Quasadron IX contains many of them, and with this guide, locating each one becomes much easier.

All Savannah Lake Printer Slurry Locations

First Printer Slurry Location

You will need the Blight Bomb Stabilizer upgrade to find this Printer Slurry.

To locate it,head east from the Savannah Lake teleporter.You’ll reach an area with stone pillars and a sticky pink ground, inhabited by Sluggators. In this area,there will be a breakable floor, which you’ll need to destroy as part of a main quest to find the Alpha Sluggator.

After dropping down, you’llsee a crack sealed with amber to the west side of the cave.Use the Blight Bomb to destroy the amber and enter the crack—this is where you’ll find it.

Second Printer Slurry Location

From the location of the Savannah Lake teleporter,head southeast.You’ll spot a crate containing a Printer Slurry on a rock in the river, surrounded by some purple cables. However, this crate won’t open right away—you’ll need to go elsewhere to unlock it.

Fast travel to the Summitfast travel point. Just to the west, you’ll see a large amber mass. Use the Blight Bomb to destroy it. After clearing the amber, you’llnotice a cracked section of ground—you need to Stomp on it. Once you do, you’ll start sliding down a long corridor.

While sliding, your goal is toshoot the glowing pink devicesalong the way. After shooting all of them, the corridor will drop you off right next to the crate, allowing you to collect the Printer Slurry.

Third Printer Slurry Location

Head directlynorth from the Savannah Lake teleporterand enter the lake. Keep the land on your right as you continue heading north. Once you spot a Blight Bomb Plant, look northeast—you’llsee a tall, narrow rock formation rising from the water.

Climb to the top of this formation, where you’ll find a circular lid-like object with a red center. To destroy it, you’ll need toperform a Stomp from mid-air, which requires a Double Jump followed by a Stomp at the right height.

However, to perform this correctly, you’ll need the Launch Boosters, Advanced Stomp Boosters, and Quadruple Thrusters upgrades. Once you execute a strong enough Stomp on the lid, it will open, allowing you to collect the Printer Slurry inside.

Fourth Printer Slurry Location

To find this, headsouth from the Savannah Lake teleporter.At the end of the river, you’llsee a tree-like creaturecalled the Baobab Maw. Stand in front of it anddive to the bottom of the lake.You’ll find the Printer Slurry at the lakebed.

Fifth Printer Slurry Location

To find this,head west from the Savannah Lake teleporter.You’ll come across three pillar-like rock formations standing side by side. There’s a Printer Slurry located on top of these pillars, but you’ll collect it later.

For now, look to the north—you’llsee another set of three pillar-shaped rock formationscovered in vines. Head over to them. At the base of this formation, go around to the right side. You’ll find some amber there—use a Blight Bomb to destroy it. This willreveal a metallic box.Pick it up and climb to the top of the rock formation.

Place the box on the buttonlocated there. This will activate an air vent nearby, allowing you to enter it. Inside the corridor, you’ll find a cracked wall—destroy it using a Bombegranate.This will lead you to the Printer Slurry.

Sixth Printer Slurry Location

To find this Printer Slurry, go back to the rock formation where you found the previous one. On top of this formation, you’ll see wilted mushrooms—use your hose to spray them with water. They will grow and turn into mushroom platforms.

Climb up using these mushroom platforms toreach the top of the rock formation.Since you previously placed the metal box on the button to access the last Printer Slurry, there will now be an air vent active at the top.

Use the Drone Glider upgrade to ride the air current to its maximum height. While airborne, spray water on the mushrooms growing on the stone pillars nearby to turn them into yellow platforms.

Climb to the highest stone pillar, then look south—you’llspot another set of three stone pillar formationsin the distance. Glide southward and grapple onto the objects beneath the floating rocks to reach the next Printer Slurry.

Seventh Printer Slurry Location

To find this, headwest from the Savannah Lake teleporterand go to the three pillar-like rock formations standing side by side. From there, head south, and you’ll spot a crate containing a Printer Slurry.

However, to open it, you’ll need toeliminate all nearby creatures, especially the Arffalo. Use the Whip to burst its blob-like shell, then defeat it. Once all the creatures are taken care of, use a Blight Bomb on the amber-covered crate to break it open and collect the Printer Slurry.

All Babutt Kingdom Printer Slurry Locations

Start from the Babutt Kingdom teleporter and look southwest.Head past the left side of the giant tree, keeping the tree on your right as you move around it. Behind the tree, you’llfind a brown barrierlabeled Batterus Lo—something you’ve likely encountered on previous planets.

To destroy it,locate a nearby Ferro Dispensernext to one of the white, fluffy tree-like plants, and collect some Ferro Goo from it. To disable the barrier, firsttarget the electrified mushroom to the left of the barrier.Use your hose to spray Ferro Goo andconnect it to the small mushroom to its left.

Next, move to the right side of the tree, where you’llfind two more small mushrooms.Create Ferro Goo paths from the electrified mushroom to both of these as well—note that one is located beneath the tree’s roots. Once all the small mushrooms are electrified, the brown barrier will disappear, giving you access to the Printer Slurry.

Start from the Babutt Kingdom teleporter andmake your way toward the base of the cliff to your southeast.Keep the cliff wall on your right as you move forward. Once youreach the Vitality Plant near the river, look southeast again. On the far side of the river, you’llspot a green barrier on the cliff wall.

Head toward it and use your Remote Drone to control Eko, sending it through the green barrier. Guide Eko through the openings in the red barriers and plug it into the device inside.

Next,swim to the center of the circular lilypadsin the lake in front of you and dive underwater. You’ll see the crate, which is surrounded by red barriers.

Examine the purple cables around the crate — they split off toward two small green barriers underwater. Exit the water, then use Eko again to enter those two green barriers and plug into the devices inside. Once both devices are activated, the red barriers around the crate will disappear, allowing you to access it.

Start from the Babutt Kingdom teleporter andhead toward the base of the cliff to your southeast.Keep the cliff wall on your right as you proceed. When youreach the Vitality Plant by the river, look east—you’ll see a cave entrance blocked by pink crystals.

Enter the cave and carefully navigate through the corridor, avoiding the spiked traps until you reach the end. After exiting the cave, you’llarrive at an area with tall grass.If you head east, you’ll find the Printer Slurry, but to open the crate containing it, you need tofollow the purple cables.

Behind the large tree to the east of the crate, there is a purple button. Another purple button is located behind the rock to the south of the crate. The third purple button is to the right of the tree northwest of the crate.Shoot all three buttons quicklyto unlock the crate and obtain the Printer Slurry.

These buttons can reactivate, so you need to shoot all three in quick succession. To make this easier, climb onto the rock northeast of the crate to quickly shoot two of the buttons, then move to the other rock to shoot the final button.

All Summit Printer Slurry Locations

Head east from the Summit teleporter. You’ll find a crate containing Printer Slurry, but to open it, you need to kill the creatures nearby. Your main objective is tofollow the cable connected to the crate, but the device it’s attached to is inactive. If you follow the cable from the inactive device, you’ll find it leads to an active device.

Shoot the active device, then follow the cable back and shoot the devices that become active one by one. You need tocomplete this within a certain time limit, or you’ll have to start over.

If you’re struggling, you can make it easier by spraying water on the pink goo on the ground with your hose. However, it’s usually more efficient to dodge and speed through the area while using good angles to shoot in order to save time.

All Florian’s Fuchsia Festivus Printer Slurry Locations

From the teleporter in this area, head north. After crossing the river connected to the waterfall, look northwest—you’llsee some column-shaped rocks in the valley below.Jump down and approach the crate containing Printer Slurry. However, to open it, you need topower the vein-like roots on the crate with electricity.

First, look south. On the ceiling of the rock formation there, there is an electric mushroom. Nearby, there’s also a plant where you can extract Ferro Goo. You need toconnect the electric mushroom on the ceiling to the mushroom on the groundof the rock formation by spraying Ferro Goo.

Additionally, the electric mushroom on the ceiling is connected to a metallic mega chunk. For this, you’ll need touse your Magnetic Fork first.Use the Fork to bring down the electric mushroom from the ceiling, thenspray the entire rock formation with Ferro Goo.

Your goal is to transfer the electricity from the electric mushroom to the mushroom below—even if you didn’t bring the mushroom down with the Fork, spraying the whole stone formation with Ferro Goo is the easiest way.

After establishing the electrical connection between the two mushrooms,return to the crate and head north of it.There, you’ll find another rock column formation, and this part is easier.Use the Magnetic Fork to bring down the electric mushroom, and this will open the crate so you can collect the Printer Slurry.

Headsoutheast from the teleporter in this area.Climb the cliff ahead and jump down into the canyon-like corridor below—this is where you’ll find the crate containing the Printer Slurry. However, to open it, you’ll need tohack the terminal and defeat waves of incoming enemies.

Once you’ve defeated all the enemies, you’ll be able to claim the Printer Slurry. Use the environment to your advantage and prioritize eliminating the moths that heal enemies.