Locating all the Printer Slurries on Zenithian Rift inRevenge of the Savage Planetwill be much more important. The reason is that you’re at the middle point of the game, and upgrades are becoming a little more expensive. On top of that, there are a few pieces of gear that you need to craft, which will help you progress more easily.

Zenithian Rift is also one of the more complicated planets featured in the survival shooter, which, in turn, could make searching for the Slurries harder. But with the help of this guide, locating each Printer Slurry on Zenithian Rift should come with ease.

Player using the Frax Underwater Scooter to swim to a Printer Slurry that is also underwater in Revenge of the Savage Planet.

Every Printer Slurry On Zenithian Rift

Having Printer Slurries banked is crucial for Zenithian Rift. As mentioned, they will allow you tocraft better gear, which can help you get off the planet faster. However, much like themany crateshidden on Zenithian Rift, the Printer Slurries are also tucked away from view.

Before we start, it’s worth noting that there are a few Slurries you may’t obtainwithout certain equipment. This guide will go through where they are and how to unlock them. So, it should be easy to follow along.

Player on a floating rock looking down at pools of water with snow around them in Revenge of the Savage Planet.

Bilodeau’s Floating Isles

Printer Slurry 1

This Slurry can befound underwater, right in the pool that’sin front of the teleporterin the region. The issue is that the Printer Slurry isblocked by a barrierthat can be brought down once thecharge points in and aroundthe pool are charged up.

To charge each point, you must use theFerro Goo Tankand connect thelarge electric mushrooms.

Player in the water at the a Printer Slurry’s location on the map of Revenge of the Savage Planet.

When all three points are electrified,follow the three veinsthat will lead you to the deepest part of the pool. Make sure you’reSurveying the water as you’re moving around. It’ll pinpoint the exact location of the Slurry.

You’ll need the Franx Underwater Scooter to navigate the waters. It can be earned by following the story mission and beating the main boss on Zenithian Rift.

Player’s postion highlighted on the map of Revenge of the Savage Planet showing the location of a Printer Slurry.

Printer Slurry 2

Start by heading to thenorthern section of Bilodeau’s Floating Isle. As you climb up to themain floating rockplatform that is located at the very top, make your wayto the rock’s base.

On thenorthern sideof its base, you’re able to find asmall platform with dehydrated mushroomsright next to it.

Players postion on the map of Revenge of the Savage Planet with the location of a Printer Slurry.

First, jump on the platformand, with yourLava Tank, extract the lava from the lava tree. Afterward, use thePower Hose to hydrate the mushrooms, giving you space to jump upwards.

There might also be a barrier blocking the entrance at the top.Simply shoot it,and then ascend the mushrooms.

Player looking below at two large carbs approaching him in Revenge of the Savage Planet.

Follow the path, and you’ll see a frozen Printer Slurry. Use theLava Tank to melt the ice, then thePower Hoseto wash away the lava. Now, the Printer Slurry is unlocked.

If you keep on walking on the same path and go beyond the Slurry, you’ll find a crate. It should be just behind the wall where the Slurry was.

Player’s postion near a Printer Slurry that is shown on the map of Revenge of the Savage Planet.

Printer Slurry 3

You can reach this Slurry by taking the floating platformstowards the main floating rock. However, once you reach the base of the large rock, look to your left, but verify you’relooking down. There will be another Slurry on a platform to rocket jump onto.

As you land,take care of the exploding enemiesfirst. The Slurry is covered in ice and needs to bemelted away by the Lava Tank. If you don’t have the tank yet, you canshoot the exploding creatures; they will cause the ice to break.

Player standing infront two trees with faces on them. There are two water falls between them and green and orange plants arounds the player in Revenge of the Savage Planet.

Brrrts Frozen Grotto

Printer Slurry 4

To access this region of Zenithian Rift, you must be inFrip’s Big Chill. Once you enter this area, make your way to theteleporter in the southof the region. Behind the teleporter, you’ll find atunnel to go down.

Head down the tunnel. Do not jump outwhen you get to the other side. Instead,look to your left,and there will be a grapple point to use your Whip on. Take the grapple point andleap to the ledgeacross from the tunnel.

Player’s postion highlighted near the a Printer Slurry location on the map of Revenge of the Savage Planet.

With aBombergranate or Blight Bomb, throw it at the wall with red coloring in the center.

This will bring down the wall, allowing you access to a Printer Slurry.

Player at the location of a Printer Slurry on the map of Revenge of the Savage Planet.

Plyxor’s Shaft

Printer Slurry 5

This Slurry may be one of the challenging ones to spot because of where it is located. When you’re at the base of the shaft, there will betwo trees backing a wall. One of the trees has itsroots covering the Slurry.

You will need to remove the roots to access the Slurry. To do so,spot any tiny pink alien creatureslying around on the ground. As the treeopens its mouth,throw the pink creatureat its mouth.

This will remove at least one root, so you have tofind two or threemore to fully remove all the roots.

Next, behind the teleporter that is in front of the tree,take the short path upwardsthat will lead you behind the tree, allowing you to take the Slurry.

Printer Slurry 6

To obtain this Slurry, you’ll need theMagnetic Fork and the Hawx Rail Grinder. You should also have theProton Whip Tether.However, if you’veupgraded your Zoot Jump Thrusters, that should be enough.

When you’re at the base of Plyxor’s Shaft, use theHawx Rail Grinder and Whip to the very top. This should take you to Bilodeau’s Floating Isles. However,don’t exit the shaftjust yet.

Slightly above the exit on the right, you can see a small ledge with amagnetic barrierin the way. Jump to the ledge, but as soon as you land,turn around, and jump up to another platformthat’s justin frontof the magnetic barrier.

Here you’ll find amagnetic throwable objectthat you can use with your Magnetic Fork.

When you’re in control of the object,throw it at the barrierto bring it down.

The Printer Slurry will be on the other side. All you need to do is jump down.

However, if you miss your step, you will drop to the bottom. So be very careful where you jump to.

The Depths Of Trrn

Printer Slurry 7

When you enter The Depths of Trrn,head to the right sideof the cave. You can find rock formations to climb up on. In front of those rocks, therewill be air pushing you away. If you’re having a hard time spotting this location,look by the teleporter near the lava; the rocks should be there.

Climb up the first rock and thenlook rightto see a ledge. The gap will be wide, so use yourProton Whip Tetherto make it across.

Air will be coming out of the walls in this area, which will cause you to be pushed back if you’re caught in its way. Wait a few seconds for the airflow to stop and keep moving. So, you’ll need to time your jumps.

As you make it to the ledge,right in frontof it will be another opening. Again,wait for the air to stop flowingto jump acrosswith the tether.

Assuming you’ve successfully made it, the Printer Slurry will beon the other sideof this opening.

Chikit’s Pool

Printer Slurry 8 & 9

The reason why both are going to be covered here is that these two Printer Slurries areclose to each other and are collected in the same way.

However, you need to have beaten theClawbarella boss and the story missionson Zenithian Rift to get access to Chickit’s Pool. On top of that, you’ll need theFranx Underwater Scooterto get around.

The good news is that once you have met the aforementioned requirements, there will be a cratebehind the bossonce you beat it, giving you the scooter.

In other words, it is straightforward to get this important piece of gear.

Once you have it,follow the pathleading youto Chikit’s Pool.

The first Printer Slurry will be at thebase of the pool, right near the entrance. As for the second, make your way to theother side of the pool. you’re able to find the Printer Slurryunder the exit point.

When you take the exit, you’ll end upnear the teleporter in the Frip’s Big Chillregion.